- low foaming
|
||
| Product description | Wicanders® Power Strip is a pH-neutral stripper. | |
| Field of application | Low foaming stripper for heavily soiled floors and to remove old floor care products. Suitable for all Wicanders® floors. | |
| Advantages | - pH-neutral and thus suitable for sensitive floors - low foaming |
|
| Sizes |
1 L |
|
|
Application |
For stripping apply Wicanders® Power Strip diluted 1:10 to 1:40 according to the degree of soiling. Work over the floor in sections using a green pad and remove the dissolved dirt with clean water before it dries again. | |
- Apply Power Strip diluted 1:10 to 1:40 according to degree of soiling
- Work over the floor in sections by using a green pad or scrubber and absorb the dissolved dirt before it dries again
Work area small enough to avoid drying
- Maintenance Cleaning: Add 3 to 7 fluid ounces to a bucket (2.5 gallons) of water and wipe floor
- Use with adequate ventilations
- Please Note: Power Strip is only needed if Floor Dressing or V-care has been previously applied to floor or when there is an accumulation of several coats of Power Polish. If it has not been applied, clean with Wicanders Spray Cleaner.
Product Lines:
Series 100, Series 1000 and Series 2000.
Coverage:
Approximately 1000 square feet, based on 1:10 dilution rate.